This is a fluorescently labeled version of the industrial yeast P. pastoris (also known as Komagataella phaffii). It is used to monitor high-density fermentations in the production of vaccines and enzymes.
For Research Use Only. Not intended for use in food manufacturing or medical procedures (diagnostics or therapeutics). Do Not Use in Humans.
General InformationDocuments Customer ReviewsInquiry
Product Information
Product Overview
This is a fluorescently labeled version of the industrial yeast P. pastoris (also known as Komagataella phaffii). It is used to monitor high-density fermentations in the production of vaccines and enzymes.
Target
Pichia pastoris
Applications
Biopharmaceutical manufacturing. The advantage is that P. pastoris can grow to very high densities, and the GFP signal provides a quick way to check the "health" of the factory cells.
Product Identity & Gene Details
Chassis Strain
Pichia pastoris
Target Gene(s)
GFP
Gene Function
GFP is often used as a "fusion tag" to ensure that the industrial protein being produced is being folded correctly by the yeast.
Modification Type
Transgenic expression (Fluorescent labeling)
Genetic Architecture
Promoter System
Constitutive or Inducible
Selection Marker
Standard Antibiotic Marker or Markerless/Scarless (No resistance genes)
Delivery & Service Standards
Deliverables
Glycerol Stocks
Shipping Conditions
Dry Ice Shipping
Lead Time
4-8 weeks
Documents
Certificate of Analysis (COA) or Project Report
Verification
PCR Sequencing
Engineered Strain Recovery & Handling
Immediate Post-Delivery Steps
1. Transfer to Storage: Immediately transfer the cryovials to a -80°C ultra-low temperature freezer. 2. Avoid Fluctuations: Do not store the vials in a "frost-free" freezer, as the temperature cycles can damage the cell membranes of the engineered strains.
Strain Recovery Protocol
To ensure maximum viability, follow this standard recovery procedure: 1. Preparation: Prepare the appropriate selective agar medium (e.g., LB agar + specific antibiotic as listed in the COA). 2. Partial Thawing (The "Scratch" Method): * Place the cryovial on dry ice. Do not thaw the entire vial. Use a sterile inoculation loop or pipette tip to "scratch" a small amount of ice from the surface of the frozen stock. 3. Streaking: Streak the cells onto the selective agar plate to obtain single colonies. 4. Incubation: Invert the plate and incubate at the specified temperature (e.g., 37°C for E. coli or 30°C for S. cerevisiae) for 16-24 hours. 5. Subculturing: Pick a single, well-isolated colony to inoculate into liquid media for your experiments.
Usage Precautions & Best Practices
Antibiotic Pressure
1. Maintenance: For strains containing plasmids or specific resistance markers, always use the correct concentration of antibiotics in both solid and liquid media to prevent plasmid loss or contamination.
2. Markerless Strains: If the strain is a "scarless" integrated knockout, antibiotic pressure is not required for maintenance, but periodic genotypic verification is recommended.
Induction Conditions
1. If your strain uses an inducible promoter (e.g., T7/IPTG or Arabinose), ensure the culture reaches the optimal OD600 (typically 0.6-0.8) before adding the inducer. 2. Verify the optimal induction temperature, as engineered strains often produce better results at lower temperatures (e.g., 16-25°C) to prevent inclusion body formation.
Disposal
All waste (vials, tips, plates) must be autoclaved at 121°C for at least 20 minutes or chemically disinfected before disposal.
